|
Here are some shots of the Rhodes after it was
cleaned up and repainted.
I'd like to re-do this some day, partially
because a much better job could be done at it but mostly because I suspect these
shapers were originally painted black. Perhaps I'll get to that whenever
time can be found to work on the slotting attachment.
|
|
|
|
Overall view
Note what appears to be flaking still visible on the vertical way casting. |
|
|
|
Closeup of the main casting with a view of the bull gear inside the access panel
|
|
|
|
Closeup of the pulley system
The jackshaft is driven by a chain belt and a 3-step cone pulley transmits power to the ram. |
|
|
|
Closup of the ram and clapper box
|
|
|
|
Another overall view
|
|
|
|
|
|
| 
